All of this type till 2006 is working 100% and all have test.

w202/w203/w208/w209/w210/w211/w215/w219/w220/w230.

You can use this device to ADD new key for car system without losing last working keys and you can use it to Programmijg New Key when all key is lost.

Need use by Motorola MC68HC908A260 Programmer, MOTOROLA-
 
705X32  PROGRAMMER, MOTOROLA-711 Programmer, MOTOROLA-
 
918 Programmer,VP380.
 
The new Mercedes device is working with smart key (old and new) used since 1997 up to 2005 (without Key Less Go system).

You can program new key (ore used one) in car and program own key if it can not work more. You read and program eeprom of CPU from Steering blocking module via diagnostic connector (38 pins). Desolder and read in programming tool two CPU from Electronic Ignition Control Module. Load these eeproms to program.

Desolder NEC CPU from the key. Solder it on the device , select the No of key and program it. Solder all CPUs on their places and start the car.You can program new keys without the car - only with EIS and steering blocking modules.

You can read these CPUs with help programming tool (for ex. ETL) for Motorolla CPU 68HC705-16(32)